AQUABAG-PURE Water Polishing Bag - SMALL
$33.95
- For Pool Under 16 feet (Over 16 feet, SEE THE PURE LARGE)
- Removes Silt, Pollen*, Bacteria, Algae, Sand, DE Power and More
- Improves Filter Performance Up To 30 Times
- Absorbs Tanning Oils and Lotions
- Works With Your Existing Filter System
- Filters Particles as Small as 1 Micron (1/1000th of a mm)
- Reusable and Durable
- No Tools Needed To Install
- Easy Adapters For Most Pools - SEE ADAPTERS
The SMALL Aquabag-PURE pool water polishing bag will remove contaminants from your pool as as small as 1 Micron. That is many times smaller than even the best pool filter! Silt, Pollen, algae, bacteria, spores, cysts and other microscopic material will be permanently removed from your pool, helping to provide the clearest and healthiest swimming environment possible. An added benefit of removing these types of contaminants is that it can reduce your chemical usage for long term savings.
If your pool is cloudy due to fine contaminants that are passing through your pool filter, our Aquabag-PURE filter will collect it and restore your pool water to crystal clear condition. As an added bonus, it will also absorb sun tanning oils and lotions.
Easy to use! Simply connect the bag to the water return port of your pool using one of our adapters or the return hose from your filter system. Then simply sit back while your pool clears. We also offer adapters to make connection a snap.
Works with in ground pools and above ground pools including soft sided pools!
Settled Debris and Silt
If you have silt settling in your pool that simply passes through your main filter, just connect the Aquabag-PURE to your filter return and vacuum as normal. Depending on the amount of debris, the Aquabag-PURE may block up and require frequent rinsing as you progress. Be sure to frequently check the bag for firmness and rinse as necessary. In the event of heavy sediment after shocking a severe case of algae, you may need to first "Vac to waste" to get the majority of it. Although the Aquabag-PURE will capture it, the number of rinses required could be excessive. To remove residual cloudiness after shocking, run your main filter for a day or two before connecting the Aquabag-PURE.
**Pollen
Effectiveness on extreme pollen and/or heavy pollen sediment may be limited.
Algae
Please read about Algae removal in our FAQ
Customer Reviews
Based on 26 reviews
73%
(19)
15%
(4)
8%
(2)
4%
(1)
0%
(0)
A
Works better than I hoped for finally a crystal clear pool.
E
I have had trouble with my pool’s water clarity since I opened it because of algae problems before I closed it last fall. I could get crystal clear water and all the suspended particles to settle to the bottom with Floculant, but when I vacuumed the sediment the particulates were too fine to filter out with my dolphin vacuum even with the ultra fine particle filter. The same thing happened with vacuuming through my sand filter. As soon as I started vacuuming the water would become immediately cloudy again. This went on for weeks. I used 3 Aquabags, 2 one return jets and 1 on an additional pump I had laying around. My water was clear within a couple of days. I was able to remove the Aquabags and very easily rinse and dry them. Now my pool is crystal clear and the Aquabags are in storage waiting for the next time I screw something up.
M
I filled our intex pool last week and it was brown, shocked it and it was still a muddy green. The local pool supply store manager told me “Drain the pool and call a water truck. It would take months to clear that up.” My aqua bag arrived Thursday and by Sunday I had a clear pool!!!! My tests showed that the water did not have metal, so we think it was sediment from our well from the red clay dirt in our area. I cleaned the aqua bag and backwashed the pools sand filter at least twice a day and then I continued using the aqua bag overnight for a few more days. Hooray and THANK YOU for saving me $400 on a water delivery truck!
K
We have been having issues with our filter and in a last ditch effort h effort to squeeze one more season out of the current filter, we resorted to the aqua bags. We put one on every return and our pool was sparkling in 24 hours!!!
I
I purchased four AQUABAG-PURE bags to help remove debris from the bottom of my pool. With summer pool time approaching, it’s common for the pool to be filled with dust-like particles that create white clouds whenever you move around in the water. Unfortunately, I switched to a cartridge filter last year, and when using the vacuum, it would just release fine particles back into the pool. I've included before/after images.
Upon receiving the bags, I set them up as best I could, though I ran into an issue with the installation accessories I ordered, as they didn’t fit the Pentair water inlets on my pool. I should have confirmed this before purchasing. The diameter of the inlet nut/ring opening was smaller than the tube. But after some trial and error, I figured out an alternate way of installing the adapter.
On day one, I added some pool clarifiers that cause very small particles to clump together. This wasn’t part of the vendor’s instructions, but I thought it couldn’t hurt. Then, I vacuumed the pool. To my surprise, no particles returned to the pool as they typically do without the bags. Over the next three days, I continued to vacuum the pool once a day. By the end of day three, the pool was clear, and the bottom was residue-free.
The bags were easy to remove and clean. I was impressed by how much residue was trapped inside them, confirming that they worked as advertised. I’ll definitely continue to use the AQUABAG-PURE water polishing bags periodically.
